 |
EVE 1.0
|
| C__ | |
| Caccel_config_t | |
| Caccel_gravity_t | |
| Cadc_analog_config_t | |
| Cadc_channel_t | |
| Cadc_digital_config_t | |
| Cadc_mux_config_t | |
| Cadc_schedule_t | |
| Cadc_state_t | |
| Cadc_streamer_state_t | |
| Cadc_streamer_t | |
| Casn1_dec_state_t | |
| Casn1_result_t | |
| Cbase64_dec_state_t | |
| Cbase64_enc_state_t | |
| CBCAST | |
| Ccan_bittime_t | CAN timing initialisation structure definition |
| Ccan_frame_t | Holds CAN frame and is used in driver's API to transfer frames between the driver and an application |
| Ccan_state_t | Holds current CAN instance state variables |
| Ccan_t | CAN driver descriptor: static structure for configuration of driver instance |
| CcbR | |
| CcbRcb | |
| CcbW | |
| CcbWcb | |
| CCExtraTraits | |
| CCFlagsTraits | |
| Cclk_lock_t | |
| CCLocFlags | |
| CCRollFlagsTraits | |
| CCRollFlagsTraits< Flag > | |
| CCTocFlagsBase | |
| Cdata_buffer_t | |
| Cdatapump_cfg_t | |
| Cdatapump_t | |
| Cdatapump_vtbl_t | |
| CDBG | |
| Cdlist_t | |
| Ceeprom_state_t | |
| Ceeprom_t | |
| Ceeprom_vtbl_t | |
| Cep_c_t | |
| Cep_init_t | |
| Cep_t | |
| Cetimer | |
| Ceve_svc_init_t | |
| Cevent_monitor_t | |
| Cflash_op_monitor_t | |
| Cgpio_ext_api_t | |
| Cgpio_ext_init_pin_t | |
| Cgpio_ext_pcal_state_t | |
| Cgpio_ext_pcal_t | |
| Cgpio_ext_sc16_t | |
| Cgpio_ext_state_t | |
| Cgpio_ext_t | |
| CHIDDEN | |
| Chttp_auth_op_t | |
| Chttp_content_type_t | |
| Chttp_enum_cvt_t | |
| Chttp_server_conf_t | |
| Chttp_server_security_t | |
| Ci2c_state_t | |
| Ci2c_t | |
| Cin_addr | |
| CIND | |
| Cio_expander_state_t | |
| Cio_expander_t | |
| Ciqrf_dpa_broadcast_t | |
| Ciqrf_dpa_confirmation_t | |
| Ciqrf_dpa_header_t | |
| Ciqrf_dpa_request_t | |
| Ciqrf_dpa_response_t | |
| Ciqrf_global_handlers_t | |
| Ciqrf_state_t | |
| Ciqrf_t | IQRF instance structure |
| Cirq_config_t | |
| Ckey_combi_t | The structure defines combi key parameters. Note that it is possible to define individual debounce time for each group. Thus it is also the way to define an individual key with debouncing which differs from default KEY_PRELL_TIME : just define a "group of 1 key |
| Ckey_repeat_t | The structure defines key repeat parameters |
| Clcd_driver_t | |
| Cled_counting_t | |
| Cled_flash_t | |
| Cmb_transfer_file_t | Structure for holding variables related to Transfer File function |
| CMbFunctionDescriptor_t | Structure for holding a callback serving one of Modbus commands. A pointer of array of these structures must be settled as the FuncHandlers member of the modbus_t structure |
| CMbVirtualfunc_t | Structure for holding a number of protocol specific virtual functions. UART related functions are the part of Modbus driver. Other protocols must be implemented on the application level. It is not necessary to implement MbStart and/or MbStop functions, if there is nothing to do. Thus functions can be settlet to NULL in the structure. However MbSendData/MbReceiveData functions are mandatory. A pointer of array of these structures must be settled as the Virtualfunc member of the modbus_t structure |
| Cmd_auto_lock_t | |
| Cmd_descriptor_t | |
| Cmd_heap_t | |
| Cmd_list_t | |
| Cmd_stat_t | |
| Cmd_state_t | |
| Cmin_max_t | Minimal and maximal possible values for the INTEGER parameters |
| Cmodbus_state_t | Modbus_state_t structure holds internal state of the Modbus driver |
| Cmodbus_t | Modbus_t structure is used for configuration of Modbus instance. The structure must be initialized before the Modbus driver may be used |
| Cmwork_t | |
| Cndef_record_t | Structure describes one parsed NDEF record. See standard NFC Data Exchange Format specification |
| Cnet_buffers_t | |
| Cnetspace_t | |
| Cnfc_ndef_changed_cb_table_t | Table element of interrupt handlers called on NDEF write attempt for supported NFC message types |
| Cnfc_nrf_state_t | Holds current NFC instance state variables |
| Cnfc_nrf_t | NFC driver descriptor: static structure for configuration of driver instance |
| Cnfc_nxp_state_t | Holds current NFC instance state variables |
| Cnfc_nxp_t | NFC driver descriptor: static structure for configuration of driver instance |
| CNOTIF | |
| Cnrf_uart_state_t | |
| Cnrf_uart_t | |
| CphPlatform_DataParams_t | OSAL parameter structure |
| Cpid_controller_t | PID controller instance data |
| Cpm_lock_t | |
| Cpwm_channel_config_t | |
| Cpwm_state_t | |
| Cpwm_t | |
| Crbuf_t | Structure that holds the state of a ring buffer |
| CRcb | |
| Crng_config_t | Struct for RNG configuration |
| CRO | |
| Crtimer | Representation of a real-time task |
| CRW | |
| Csc16_chip_t | |
| Csc16_reg_workitem_t | |
| Csc16_uart_state_t | |
| Csc16_uart_t | |
| Csi4455_reply_GENERIC_map | |
| Csockaddr | |
| Csockaddr_in | |
| Cspi_cs_t | |
| Cspi_memory_data_buffer_header | |
| Cspi_memory_t | |
| Cspi_state_t | |
| Cspi_t | |
| Cstack_pool_state_t | |
| Cstack_pool_t | |
| Cstimer | |
| CSU | |
| Cswint_state_t | |
| Ctemp_sensor_t | |
| Cthread_t | |
| Ctimer | |
| Ctiny_seq_t | Lett string gjennomføring |
| Ctls_cfg_t | |
| Ctls_conn_t | |
| Ctls_net_ctx_t | |
| Ctls_pump_t | |
| Ctoc_blob_t | |
| Ctoc_file_context_t | |
| Ctoc_segment_ptr_t | |
| Ctoc_service_t | |
| Ctoc_t | Applikasjon-spesifikk parameter beskrivelse |
| Ctoc_var_context_t | |
| Cuart_api_t | |
| Cuart_state_t | |
| Cuart_t | |
| Cuip_80211_addr | 802.11 address |
| Cuip_802154_longaddr | 64 bit 802.15.4 address |
| Cuip_802154_shortaddr | 16 bit 802.15.4 address |
| Cuip_buf_t | |
| Cuip_conn | |
| Cuip_eth_addr | 802.3 address |
| Cuip_eth_hdr | |
| Cuip_fw_netif | |
| Cuip_ip4addr_t | |
| Cuip_stats | |
| Cuip_udp_conn | |
| Curb_t | |
| Cusbnet_rx_buf_t | |
| Cusbnet_stat_h | |
| Cusbnet_tx_buf_t | |
| Cusbnet_tx_tiny_buf_t | |
| Cuwork_t | |
| Cval_t | Generel verdi |
| CVIRT | |
| CVLEN | |
| CWcb | |
| CWO | |
| Cwork_t |
1.8.11 
